D158 Springless Lift and Lower Telescopic Straight Rod Barrier

D158 Springless Lift-and-Drop Telescopic Straight Rod Barrier Gate

The D158 intelligent barrier gate features an innovative telescopic straight rod and grille rod design. The straight rod can extend up to 6 meters with a springless lifting mechanism for extended service life. The grille rod can reach up to 5 meters, making it easy to transport. With a 155mm grille spacing, it ensures both safety and aesthetic appeal. Equipped with servo frequency conversion control, the lifting and lowering speed is adjustable. It comes with built-in resistance rebound to reduce losses caused by accidents. Powered by a DC24V brushless motor and integrated movement mechanism, it operates more smoothly!

I. Product Parameters:
1. Operating Voltage: DC24V
2. Motor Power: 100W
3. Operating Temperature: -30°C to 80°C
4. Gate Rod Length: ≤6 meters
5. Lift/Drop Time: 2-6 seconds
6. Remote Control Distance: ≤30 meters
7. Input Interface: Switch signal or high-level signal
8. Chassis Dimensions: 1035*355*245mm
9. Insulation Class: Class F
10. Protection Rating: IP54
11. Relative Humidity: ≤90%
12. Gate Rod Center Height from Ground: 890mm

II. Product Features:
1. Utilizes servo barrier gate control technology with adjustable lifting and lowering speeds for stable and reliable operation.
2. Employs a precision four-bar linkage mechanism for fast and smooth rod movement, effectively reducing rod shaking, lessening motor load, and extending the gate's service life.
3. Features a ground-hugging full-height grille rod design to prevent children or small animals from crawling under the gate, enhancing safety.
4. Resistance Rebound: If the gate rod encounters resistance while lowering, it automatically lifts to prevent damage from errors.
5. Ground Loop Anti-Crush: During descent, if a ground loop signal is detected, the gate rod automatically lifts and remains raised until the signal is restored, ensuring safety.
6. Open Priority Anti-Crush: In emergencies during descent, whether opening or closing, the gate will perform an opening action upon receiving an open signal.
7. Rubber Strip Anti-Crush: The gate rod is equipped with a rubber strip that cushions impact on vehicles, reducing losses from accidents.
8. Power-Off Lift: The gate automatically lifts during a power outage to avoid blocking vehicles. This feature is optional.

III. Product Advantages:
1. The D158 uses a DC24V brushless motor, integrated movement mechanism, and precision four-bar linkage structure for quiet and smooth operation. The straight rod can be lifted and lowered without springs.
2. Telescopic grille rods up to 5 meters and telescopic straight rods up to 6 meters solve logistics challenges. Custom UV printing on rods prevents bubbling, fading, and ensures durability. A 155mm grille spacing offers safety and aesthetics.
3. Adjustable Lifting Speed: Grille rod (adjustable from 3-6 seconds based on length); Straight rod (adjustable 1.8~3 seconds for ≤3.5m, 3-6 seconds for 3.6~4.5m, 5-6 seconds for 4.6m-6m).
4. Supports automatic and manual limit learning. Motor direction can be swapped left/right (grille rod direction change requires replacing the main shaft crank arm).
5. Built-in resistance rebound and anti-crush rubber strip under the gate rod minimize accidental losses.
6. Supports power-off lift function to prevent vehicle blockage during outages. Features delayed drop and small-angle ground loop shielding for safer parking lot access.

IV. Product Showcase: (Learn more:13711976889)